TMD-547 Modular lifting tower. Maximum height: 8 m. Maximum Load: 800 Kg.

GUIL QUALITY PRODUCTS-5
  • PortfolioTMD547

TMD-547-Foto-grande
TMD547-Grande
TMD-547-Grande
TMD-546-Grande

Strengthened modular tower composed of square truss (300 x 300 mm /11.81″ x 11.81 “) and designed to lift up to 800 kg (1763.7 lb) to a maximum of 8.37 metres (27’5.53”)

Safety System

This tower is equipped with a special Zip/Trigger safety system, consisting of metal plates welded to the mast trusses, thanks to which, in the extreme case of cable breakage the safety trigger (in the sleeve block) would automatically slide into the next slot, blocking the load and stopping it from falling (preventing any displacement).

Features

This modular structure consists of five reinforced square truss sections of 300 mm x 300 mm (Ø 50 tubes x 2.5 mm thick): two 1m sections and three 2m sections. They are made with extruded aluminium (Alloy: EN-AW 6082 T6 according to the safety norm UNE-EN573) and TIG welded (continuous cord) for maximum strength and have a special polished finish for maximum durability and an unbeatable appearance.

All sections are fitted with inner braces to reinforce them against bending and deformations. The truss sections are joined together by conical female with spigots and safety “R”-springs, which guarantee maximum safety and strength allowing a quick and easy set-up.

Thanks to its modular design, these towers can be assembled with different truss configurations; it can even be set up at a lower height by using one less truss section making it possible to be used for indoor events. Contact our technical department for further information.

TMD-547 is designed to be used with an electric hoist (not included). This tower can be raised or lowered easily and safely using our BC-TMD Tower Lifting System and an electric hoist. BC-TMD is fitted to the sleeve block with two diagonal braces which clamp on to the horizontal truss to enable the tower to be raised and lowered using the electric hoist.

GUIL modular towers have a quick and easy assembly thanks to their hinge set; the structure is set up laying it on the floor (horizontally). Then, once the tower is assembled, with just the help of the hoist and without any extra effort, the tower can be hoisted into position.

The TMD-547 tower is equipped with a three-sided sleeve block (Ref. CRR-547) made of aluminium (Alloy: EN-AW 6082 T6 according to norm UNE-EN573), specially designed to be used with an electric hoist (not included) and has sixteen reinforced nylon rollers, to ensure it slides up and down the tower smoothly. The sleeve block has the function of connecting the rigging truss to the tower and is designed to be used with 30 x 30cm or 40 x 40cm GUIL trusses.

Its aluminium top section is made of two 10 mm thick aluminium beams fitted with steel pulleys and two heavy-duty bolts to stop the cable from coming out of them. It has a double re-send system, which works like a pulley system distributing the load over the 2 cables, in this way making it easier and safer to use.

The compact base, manufactured in reinforced steel and finished in a textured powder coating (Epoxy) for its use outdoors, is equipped with:
• Four aluminium adjustable braces to level and stabilise the tower (accurate vertical adjustment). Theses braces are an added item to improve safety and resistance on the whole structure.
• Four detachable stabiliser legs provided with leveller screw jacks that have reinforced spin handles with double thread and speed which makes the levelling task easier. Their non-slip foot plates ensure a perfect adjustment of the tower to the floor surface.
• Five heavy-duty castors (Ø 100 mm) for an easy handling and manoeuvrability.
• A spirit level for the correct vertical adjustment of the structure.

* Trigger safety system to secure the load in the unlikely case of cable breakage.
* Double re-send cable.
* Three-sided sleeve block made of aluminium (Alloy: EN-AW 6082 T6 according to norm UNE-EN573).
* The rollers, to guide the sleeve block up and down the tower sections, are made with nylon to obtain a perfect sliding and to protect trusses.
* Compact base fitted with five heavy-duty swivel castors (Ø 100 mm).
* Mounted hinge-set for a practical and quick set-up and dismantling of the tower.
* Pulleys with bearings for the cable to go through.
* Four aluminium leveller arms to stabilise the tower (accurate vertical adjustment) to improve safety and resistance on the whole structure.
* Four detachable stabiliser legs provided with leveller screw jacks that have reinforced spin handles with double thread and speed which makes the levelling task easier. Their non-slip foot plates ensure a perfect adjustment of the tower to the floor surface.
* Provided with a spirit level for the correct vertical adjustment of the structure.


TMD-547 (ing)

Downloads



Lifting Process

TMD-547 is designed to be used with an electric hoist (not included). This tower can be raised or lowered easily and safely using our BC-TMD Tower Lifting System and an electric hoist. BC-TMD is fitted to the sleeve block with two diagonal braces which clamp on to the horizontal truss to enable the tower to be raised and lowered using the electric hoist.

GUIL modular towers have a quick and easy assembly thanks to their hinge set; the structure is set up laying it on the floor (horizontally). Then, once the tower is assembled, with just the help of the hoist and without any extra effort, the tower can be hoisted into position.



Your opinion is important to us


<< << Back to products