TMD-549 Ground Support Tower. Maximum height: 12 m. Max. Load:1500 kg

GUIL QUALITY PRODUCTS-5
  • portfoliotmd549

Ground Support TMD-549-GUIL
Ground Support TMD-549-GUIL
Ground Support TMD-549-GUIL
Ground Support TMD-549-GUIL

Modular Ground Support Tower capable of lifting 1500kg (3307 lbs) to a maximum height of 12 metres (39’4.44″) using an electric hoist (not included).

Safety System

Our ground support towers are equipped with a special Zip/Trigger safety system: mast sections have welded metal plates with slots thanks to which, in the extreme case of chain breakage, the safety trigger fitted to the sleeve block would automatically slide into one of the slots, blocking the sections in place and preventing any displacement.

Features

This structure is made out of six reinforced square sections of 400 mm x 400 mm truss (1’3.75″ x 1’3.75″) – Ø 50 tubes x 4 mm thick (1’7.68″ x 0.16″): two 1m sections, two 2m sections and two 3m sections.

GUIL truss is manufactured from extruded aluminium tube (Alloy: EN-AW 6082 T6 according to the safety norm UNE-EN573), are TIG welded (continuous cord) and have a special polished finish for maximum durability and an unbeatable appearance. All sections have a double ladder design ad are fitted with inner braces to reinforce them against bending and deformations. The different sections are joined together by the UTR-05 coupling system, which guarantees maximum safety and strength allowing a fast and easy set-up.

Note: Due to its modular design, these towers can be assembled with different truss configurations. Contact our technical department for further information.

These towers are equipped with a three-sided sleeve block made of aluminium (Alloy: EN-AW 6082 T6) with sixteen reinforced rollers, to ensure it slides up and down the tower smoothly. It is designed to be used with TS520 Supertruss series. Please contact our technical department if you want to use another kind of truss.

Heavy duty base of 726 x 726 mm (2’4.58″ x 2’4.58″) manufactured in aluminium (Alloy: EN-AW 6082 T6) and fitted with four heavy duty swivel castors with steel core (Ø 100 mm / 3.94″ ), for easy handling and manoeuvrability. Base is equipped with four detachable outriggers with telescopic design, and provided with four reinforced levellers for a perfect adjustment to all surfaces.


TMD-549-(ing)

Downloads



Lifting Process

This tower is fitted with a hinge system allowing it to be assembled horizontally by laying it on the floor. It can be raised or lowered manually, or to make it easier our BC-TMD Tower Lifting System and an electric hoist can be used. The BC-TMD accessory (sold separately) is fitted to the sleeve block with two diagonal braces which clamp on to the horizontal truss to enable the tower to be raised and lowered safely using an electric hoist.



Your opinion is important to us


<< << Back to products